SYSTEM DESIGN OF FIRE FIGHTING VEHICLE

Abstract

In this robot provides fire protection when there is a fire in a tunnel or in an industry by using automatic control of robot by the use of microcontroller in order to reduced loss of life and property damage. This robot uses dc motors, castor wheel, microcontroller, sensors, pump and sprinkler. Microcontroller is the heart of the project. Microcontroller controls all the parts of the robot by the use of programming. In this robot as the fire sensor senses the fire, it sends the signal to microcontroller; since the signal of the sensor is very weak the amplifier is used so that it can amplify the signal and sends it to microcontroller. As soon as microcontroller receives the signal a buzzer sounds, the buzzer sound is to intimate the occurrence of fire accident. After the sounding of the buzzer microcontroller actuates the driver circuit and it drives the robot towards fire place, as the robot reaches near the fire microcontroller actuates the relay and pump switch is made ON and water is sprinkled on the fire through the sprinkler